Align Change Order
Always print your document without alignment settings
first, then proceed to align the document, if necessary.
Click "Align" to align the text on the page, the following screen will appear.
Clicking the "Reset" button to the right of the alignment area will clear
all alignment settings. Clicking on the "Save & Exit" button will save your
new alignment settings.
Use the horizontal and vertical scroll bars to adjust the top and left margins. On the
above example the top margin has been decreased by .125 lines. This was accomplished by
scrolling up (U) on the top margin scroll bar. The left margin has been increased by .6
characters, this was accomplished by scrolling right (R) on the left margin scroll bar.
After setting alignment adjustments, click "Print" to test print the selected
document.
The printer selection screen will be displayed. If you need to select the printer, click
on setup. When printing for alignment, no other settings should by changed. The correct
settings will automatically be displayed on the printer selection screen.
Click "OK" on the printer selection screen. The following message will be
displayed.
Place the requested form in the printer tray. Normally the document will be placed in
the printer tray with the printed side up and the top of the pages to the left. However,
this may vary from printer to printer so some experimentation may be necessary.
Click "Ready" to print, click "Exit" to quit with no action.
Repeat this alignment process until the text is registered correctly on the page. When
"Save & Exit" is clicked, the current alignment settings are saved and will
remain in effect until the next alignment is performed.
Leave Manual